Applicable to the bottoming of handbags and luggage.
Full filling degree, soft feel, strong adhesion, do not stick the net, good fastness
直接丝网印刷
丝网选用80-100目为佳
待表面干燥后再上面开始印花
Direct screen printing
80-100mesh screen is preferred
Start printing after the drying of surface
BE800箱包专用浆
BE800 luggage special paste
该浆适用于箱包、手提袋无纺布印花。
白度高、遮盖力强、牢度好。
The paste is suitable for the printing of luggage, handbags and non-woven fabrics
可直接丝网印刷。
丝网选用80-100目为佳。
可根据需要的色彩和色度加入适量涂料色浆。
Direct screen printing is available
80-100mesh screen is preferred
Add proper amount of pigment printing paste according to the required color and chromaticity
BE602立体厚板浆
BE602 stereo thick paste
手感好、不回粘、牢度好、立体效果佳、棱角鲜明
Good feel, no return sticky, good fastness, good stereo effect and distinctive corner angles
建议使用80-100目厚膜网版进行印刷5-8次，立体效果更为突出。
印刷完毕后应及时清洗网版，否则会因厚板浆粘着性太好，造成网版无法使用。
水洗测试前应确保印花完全干透，否则会影响测试效果。
80-100mesh thick film screen is used for 5-8 times of printing, with more prominent stereo effect.
After the printing is completed, timely clean the screen, otherwise the screen cannot be used due to the superb thick paste adhesion.
Ensure the printing is completely dry before washing test, otherwise it will affect the test results.
BE白胶浆-1100
BE白胶浆-1200
BE高弹白胶浆-1400
BE white paste-1100
BE white paste-1200
BE elastic white paste-1400
适用于深色织物承印要求弹性极高的花纹，特别适用于针织布上印花。
遮盖率强，白度好。
手感柔软，弹性极好（针织物上印花不开裂），亮度高，干燥成膜速度快，牢度好。
Applicable to the printing of dark fabrics with the requirement of highly elastic pattern, particularly for the printing of knitted cloth.
Strong coverage, good whiteness
Soft feel, excellent elasticity (no cracking on the printing of knitted fabric), high brightness, fast dry and film speed, good fastness.
丝网选好用80-120目为佳。
可根据所需要的色彩和色度适量加入涂料色浆，根据颜色深浅自行调配白胶浆与透明浆之间的比列。
80-120mesh screen is preferred
Add proper amount of pigment printing paste according to the required color and chromaticity; adjust the proportion between white paste and transparent paste according to colors.
BE透明浆-1100
BE透明浆-1200
BE高弹透明浆-1400
BE transparent paste-1100
BE transparent paste-1200
BE elastic transparent paste-1400
适用于浅底色织物承印要求弹性极高有彩色花纹。
与其他透明浆相比，该浆具有它突出的弹性。
Applicable to the printing of light color fabrics with the requirement of highly elastic pattern.
Compared with other transparent pastes, this paste has its outstanding elasticity.
名称Name
用途及特点Purposes and Characteristics
使用方法
Usage
BE817尼龙白胶浆
BE817 nylon white paste
适用于经过防水处理的尼龙物品，如各种运动服、休闲服、包装、晴雨伞等。
印好花纹，手感极好，牢度佳，成膜好。
Applicable to nylon materials with water treatment, such as a variety of sportswear, casual clothes, packaging, umbrella, etc.
The printed patterns have superb feel, good fastness and good film.
丝网选用80-120目左右为佳。
BE819可根据所需的色彩和色度加入适量色浆，一般情况加3-5%。
需要特殊牢固度，使用前加1%的BE-868A交联剂搅拌均匀。
The 80-120 mesh screen is preferred.
Proper amount of color paste is added according to the required color and chromaticity, generally 3-5%.
Special fastness is required, 1% of BE-868A cross-linker shall be added to stir.
BE819尼龙透明浆
BE819 nylon transparent pulp
该浆效果同于BE817，适用于承印浅色尼龙物品。
该浆与其它透明浆相比，有它特殊的牢度和用途。
The paste effect is the same as BE817, suitable for printing light color nylon items.
Compared with other transparent paste, the paste has special fastness and purpose.
BE高光加光浆
BE high light lighting paste
光泽表面亮，柔软而不粘手，耐水洗，牢固度好。
Glossy surface, soft and not sticky, washable, good fastness.
增加表面光亮度，特别在使用低档胶浆与凹浆印花后，可在表面印刷BE高光加光浆加光。
Add the surface brightness, particularly after the use of low-grade paste and concave paste for printing, BE high light can be coated on surface for glossing.
BE白胶浆
BE弹性白胶浆
BE white paste
BE elastic white paste
适用于深底色织物印花，如文化衫，鼠标垫和针织布上的印花。
白度好，手感柔软、不回粘，遮盖力强、牢度好。
Suitable for dark background fabric printing, such as the printing on T-shirt, mouse pad and knitted fabric.
Good whiteness, soft feel, no return stick, good coverage and fastness.
BE透明浆
BE弹性透明浆
BE transparent paste
BE flexible transparent paste
该浆具有特殊牢度，使用浅色织物印花。
该浆加色浆后印花效果理想。
印花成品色泽鲜艳，轮廓清晰，光亮度好。
柔软而有弹性。
承印织物亮度特别好。
The paste has special fastness, use light-colored fabric printing.
The paste has ideal printing effect after adding color paste
The printing finished products have bright color, clear edge and good brightness.
丝网选用80-120目为佳。
可根据所需要的色彩和色度适量加入涂料色浆，根据颜色深浅自行调配白胶浆与透明浆之间的比例。
The 80-120 mesh screen is preferred.
Proper amount of pigment printing paste can be added according to the required color and chromaticity.
名称Name
用途及特点Purposes and Characteristics
使用方法
Usage
BE化纤白胶浆
BE fiber white paste
适用于化纤、梭织布印制白色花纹，可用机印（圆网机、平网机）及丝网工艺。
遮盖率强、白度好，高温烘干不发黄，牢度好。
Applicable to the printing of white pattern of fiber and woven cloth, machine printing (cylinder machine, flat screen machine) and silk screen process.
Good cover ratio, good whiteness, high temperature drying without yellow, good fastness.
Applicable to light-colored fabric printing.
Featured by fast drying, good fastness.
可直接丝网印花。
丝网选用80-120目为佳。
如需要特殊牢固度，可加入7-10%的BE4200常温粘合剂或160℃的高温烘培。
天气干燥，可加入少量甘油防止塞网。
Direct screen printing.
80-120 mesh screen is preferred.
If you need special firmness, 7-10% of BE 4200 room temperature adhesive or 160℃ high-temperature baking can be added.
In dry weather, a small amount of glycerin can be added to prevent screen blockage.
BE化纤快干浆
BE fiber fast drying paste
适用于浅色织物印花。
具有干燥快、牢度好等特点。
Applicable to light-colored fabric printing,
Featured by fast drying, good fastness.
BE罩印乳胶浆
BE overprint latex paste
该浆适用于棉布、梭织布印白色花纹。
耐洗、耐揉、牢度好。
The paste is applicable to the white pattern of cotton cloth, woven fabrics.
Washable, resistant to rubbing, good fastness.
BE罩印白浆
BE overprint white paste
该浆适用于印染厂织物如棉布、梭织布印白色花纹。
该浆效果略低于罩印乳胶浆，但成本低，适应用户大量应用。
The paste is applicable to the white pattern of cotton cloth, woven fabrics of printing and dyeing mill.
The paste effect is slightly lower than overprint latex, low cost, suitable for the use of large number of users.
丝网选用80-100目为佳。
白度好，目度细，印深色织物遮盖率强。
适用于机器印花，如平网机、圆网机，也可用于手工台板丝网印刷。
印花时其它助剂，如尿素、甘油、柔软剂、渗透剂酌情加入，一般印花不需要加入。
80-100 mesh screen is preferred.
Good whiteness, fine-mesh, strong coverage of dark fabric.
Applicable to machine printing, such as flat screen machine, rotary machine, can also be used for manual platen screen printing.
During printing, other additives such as urea, glycerol, softener and penetrating agent can be added according to circumstances. It is unnecessary in general printing.
